下扬子地区下志留统风暴沉积特征及风暴作用对泥页岩品质的影响

近年来在下扬子地区页岩气地质调查井所获取的地层岩心资料，揭示该地区下志留统风暴沉积较为发育。基于精细的岩心观察描述，详细分析了下扬子地区下志留统高家边组下段中上部风暴沉积的特征，并阐明了风暴作用对泥页岩的影响。研究表明：研究区风暴岩岩性偏细，以粉砂岩为主，石英含量较高，结构成熟度较低，具2种不同的粒度概率曲线；主要发育底部冲刷面、块状层理、平行层理、丘状交错层理、波纹交错层理、准同生变形构造等沉积构造；垂向上主要识别出4种风暴沉积序列，均具有从底到顶粒度变细的沉积特征，不同的沉积序列与风暴流能量的强弱有关。下扬子地区早志留世频繁的风暴活动与研究区的古地理背景和古气候条件具有内在联系。特大型风暴对浅海陆棚深水区的细粒泥质沉积物特征产生重要影响，包括降低有机质含量、减少单层厚度、破坏垂向连续性、改变原始沉积构造和侧向稳定性等，总体上降低了泥页岩的品质。因此，研究认为在页岩气的勘探和评价过程中应重视风暴因素对陆棚深水区原始泥质沉积物的影响。     

Understanding on the hydrogen detection of plasma sprayed tin oxide/tungsten oxide (SnO2/WO3) sensor

The plasma spray technique was well proven in producing metal oxide based gas sensors in the last two decades using different powder feedstocks. However, limited research was made to fabricate hydrogen gas sensor from tin oxide layer coated over tungsten oxide layer. This paper attempts to interpret the hydrogen gas sensing performances of plasma sprayed coating derived by depositing tin oxide layer over tungsten oxide (SnO₂/WO₃) layer. Plasma sprayed SnO₂/WO₃ sensor showed maximum response of 90% at 150 °C in contrast to stand-alone WO₃ (89% at 350 °C) and stand-alone SnO₂ (89% at 250 °C). The lower operating temperature of SnO₂/WO₃ sensor without compromising gas response was attributed to the WO₃–SnO₂ hetero-junction. SnO₂/WO₃ sensor showed selective sensing towards hydrogen with respect to carbon monoxide and methane gases. This sensor also possessed repeatable characteristics after 39 days from the initial measurement. In a nut-shell, plasma spayed SnO₂/WO₃ sensor showed stability of base resistance, repeatability after successive response and recovery cycles, selective sensing towards 500 ppm H₂ with significant magnitude of gas response of 90%, response time of 35 s and recovery time of 269 s at a temperature of 150 °C.     

成分配比对稀土钨电极材料组织及力学性能影响

通过固液掺杂、等静压压制、中频烧结的方法，制备了不同的氧化镧、氧化钇、氧化锆三元掺杂成分比例的钨电极材料烧结棒材，探究了不同成分配比对样品显微组织、第二相粒子分布以及宏观力学性能的影响。结果表明，氧化镧、氧化钇、氧化锆三元复合添加能够有效改善第二相粒子在钨基体中的分布形态，降低第二相在晶界的过度富集，提高钨电极材料的综合力学性能。并且当添加成分镧、钇、锆质量比为3:1:1时，材料具有最好的综合力学性能，致密度可达96.04%，显微硬度可达549.37HV0.3，抗压强度可达3785MPa，原因是此配比下第二相粒子最为细小均匀，弥散程度最高，对基体晶粒的细化作用最好，该配比下钨基体平均晶粒尺寸达到10.3μm。     

钨中空位及其团簇的能量学和动力学性质参数

在总结前人钨中空位及其团簇的能量学和动力学行为的研究成果基础上，采用第一性原理方法系统计算了钨中空位及其团簇的结合能和扩散能垒。研究发现，交换关联泛函PW91和PBE较PBEsol、AM05和LDA更适合用于计算钨空位的能量学性质。基于第一性原理计算结果对文献中单空位形成能、双空位作用性质等争议性问题进行了讨论，并对钨经验势进行了评估。研究结果表明，钨中孤立单空位间总是相互排斥，而空位团簇（V_n>3）对单空位具有很强的吸引作用，其结合能随着所含空位个数增多呈现波动性增大的趋势。空位团簇稳定结构可通过最小化Wigner-Seitz表面积来确定，其结合能与V_n与V_n-1之间的Wigner-Seitz面积之差呈正比。     

电喷雾质谱法示踪钨回收过程离子的转化路径

将环隙式离心萃取器(ACCs)与电喷雾飞行时间质谱(ESI-TOF-MS)相结合，在线监测了回收过程中的钨萃取行为(宏观)和钨形态的转化路径(微观)，发现宏观萃取反应和微观离子形态转化同时发生并相互补充。伯胺N1923萃取钨在144 s内即可达到萃取平衡，萃取率高达98%以上，同时，酸钨比n(H)/n(W)是一个关键变量，当酸钨比n(H)/n(W)=2.4时，全流程钨回收率超过93%。最后，得到了基于钨形态监测的萃取机理，同时，减少原料液中W1含量，增加W10含量，可有效提高钨回收效率。     

A CCD-ADI method for two-dimensional linear and nonlinear hyperbolic telegraph equations with variable coefficients

In this paper, a combined compact finite difference method (CCD) together with alternating direction implicit (ADI) scheme is developed for two-dimensional linear and nonlinear hyperbolic telegraph equations with variable coefficients. The proposed CCD-ADI method is second-order accurate in time variable and sixth-order accurate in space variable. For the linear hyperbolic equation, the CCD-ADI method is shown to be unconditionally stable by using the Von Neumann stability analysis. Numerical results for both linear and nonlinear hyperbolic equations are presented to illustrate the high accuracy of the proposed method.     

黔北桑木场背斜铅锌矿深部找矿实例分析*#br#

黔北桑木场背斜位于上扬子地块黔北隆起区毕节弧形褶皱带与赤水克拉通盆地的交汇部位，属于有利的铅锌成矿区带。区内铅锌矿的赋矿层位主要有震旦系灯影组、寒武系清虚洞组、高台组及石冷水组，矿体多产于背斜核部并受断层或裂隙控制。通过对地层岩性特征、地表矿化特征、控容矿构造特征、化探异常特征、物探异常特征等进行综合研究，选择在成矿有利地段进行了工程验证，为进一步开展桑木场背斜铅锌矿深部找矿工作提供了思路。     

陕西省略阳县干河坝金矿地质特征及矿床成因探讨

干河坝金矿床是南秦岭南段勉略康构造混杂岩带内属受岩相和构造双重控制的构造蚀变岩型金矿床。该矿床的矿体集中产于古生界泥盆系金家河岩组金家河千枚岩与乔子沟火山岩的岩性—构造接触带附近，多呈似层状、透镜状。为进一步探讨该矿床成因，通过对矿床成矿地质特征、地球化学背景及硫同位素的系统研究，认为：①该矿床的赋矿层位就是其初始矿源层；②经区域变质变形和多期构造活动，初始矿源层中的成矿物质活化、迁移，在近EW向张性裂隙中充填、沉淀而富集成矿。     

Comparative analysis on performance of vertical drain improved clay deposit under vacuum or surcharge loading

This paper presents two well-instrumented large-scale field tests of PVD-improved soft soil with vacuum and surcharge preloading, respectively. The two large-scale field tests were conducted adjacent to each other with the same preload. A comparative analysis was performed to investigate the performance of subsoil (i.e., the ground settlement, the layered settlement, the lateral displacement of subsoil and pore water pressure) under vacuum preloading and equivalent surcharge preloading. Some design methods were verified based on the field data. Cone Penetration Tests (CPT) and Vane Shear Tests (VST) were conducted to assess the improvement effects on subsoil after preloading. The results showed that as compared with surcharge preloading, vacuum preloading mitigated the differential settlement of the ground. The vacuum pressure transmitted into the soil with a minor loss through the PVD length. From a practical point of view, the improvement effects by vacuum preloading and surcharge preloading were similar in terms of influence depth and soil strength based on the in-situ tests.